• English |
• Change language
  • > Deutsch
  • > Englisch
  • > Español

• Home
• Products
  • > Patterned
  • > Granex™
  • > ColourTex®
  • > Metal Art™
  • > Super Mirror
  • > RigiTube™
  • > Special Finishes
  • > Product Benefits
• Applications
  • > Architecture
  • > Components
  • > Elevators
  • > Machinery
  • > Refrigeration
  • > Transport
• About Us
• Contact Us
• Links

Back to top

Granex™ - Forms of Supply

METALS

Stainless steel: all grades including 304 / 1.4301, 316 / 1.4401 and 430 / 1.4016. OTHER METALS MANUFACTURED UPON REQUEST.


FINISHES

Stainless steel: 2B, bright annealed, patterned finishes, coloured stainless steel [see ColourTex® Finishes].


LENGTHS

Metric : Standard lengths are 2,000 and 2,500mm.

USA : Standard lengths are 78", 96" and 120".

NON-STANDARD LENGTHS ARE AVAILABLE UPON REQUEST.<>


WIDTHS

Metric : Standard widths are 1,000mm, 1,500mm and 1,250mm.

USA : Standard widths are 36", 48" and 60".

NON-STANDARD WIDTHS ARE AVAILABLE UPON REQUEST.

NOTE:

Thicker gauges are available but the consistency of the visual appearance of raw material tends to deteriorate over 2.0mm (0.079'') and this can effect the appearance of the Granex™ Finishes with thicker gauges. The Granex™ product can be supplied with minor defects which are present in the raw material. This is the nature of the finish.

Standard manufacturing parameters are stated throughout this product catalogue. Please enquire for non-standard requirements as these may be possible.

• 1. Sample Statement: Samples supplied by Rimex are for promotional purposes only and are not to be used as control materials for goods supplied. If control samples are required for a specific order Rimex needs to be notified in advance.



• 2. Product Images Statement: Product images are not to scale. They are scaled to give the best visual representation of the product.



• 3. Promotional Advice and Materials Statement: All data, images, drawings, descriptions and other information furnished by Rimex including verbal information, in or on its web site, catalogues, brochures, CD's, pamphlets, price lists, documents or any other promotional media are intended to be as accurate as possible but are given for general information only and are not binding on Rimex in respect of a particular order. All information, unless stated otherwise, is subject to reasonable variations. Rimex does not accept responsibility for errors or information which is found to be misleading. Before using products supplied or manufactured by Rimex, the customer should satisfy itself of their suitability for any required purpose.



• 4. Protective Tape Statement: Unless ordered to the contrary all material is coated with standard commercial protective tape. No warranty is provided by Rimex as to the suitability of coating used. A copy of appropriate data sheets are available upon request. If a warranty is required the customer should deal direct with a protective tape supplier and notify Rimex of the coating to be used. The use of nonstandard protective tape might be an additional cost to previously quoted prices. Protective tape should be removed as soon as practical and should not be exposed to direct sunlight and temperatures that might cause delamination of adhesive on the coating. The customer is always advised to seek information from the coating manufacturer. Rimex cannot provide information or warranties in respect of protective tapes.

Stainless steel is highly recyclable and typically contains 60% of recycled material. This percentage is increasing. Source: International Stainless Steel Forum.

Back to top