• English |
• Change language
  • > Deutsch
  • > English
  • > Español
  • > Français

• Home
• Products
  • > Patterned
  • > Granex™
  • > ColourTex®
  • > Metal Art™
  • > Super Mirror
  • > RigiTube™
  • > Special Finishes
  • > Product Benefits
• Applications
  • > Architecture
  • > Components
  • > Elevators
  • > Machinery
  • > Refrigeration
  • > Transport
• About Us
• Contact Us
• Links

Back to top

ColourTex® Finishes - Forms of Supply

METALS

Stainless steel: all grades including 304 / 1.4301 . 316 / 1.4401 . 430 / 1.4016


FINISHES

Stainless steel: mirror, satin and vibration polishes [see Other Polished Finishes], bead blasted [see GranexT Finishes] and patterned coloured stainless steel [see ColourTex® Finishes] and combined with custom etched designs [see MetalArtT Finishes].


LENGTHS

Metric : Standard lengths are 2,000mm, 2,500mm and 3,000mm and the maximum length is 3,100mm.

USA : Standards lengths are 78'', 96'', and 120'' and the maximum length is 122''.

NON-STANDARD LENGTHS ARE AVAILABLE UPON REQUEST.

WIDTHS

Metric : Standard widths are 1,000mm and 1,250mm.

USA : Standard widths are 36'' and 48''.

INDIVIDUAL PATTERN PARAMETERS ARE AS STATED BELOW THE PRODUCT IMAGES. NON-STANDARD SLIT WIDTH REQUIREMENTS ARE AVAILABLE UPON REQUEST. PLEASE CHECK GAUGE AND WIDTH COMPATIBILITY BEFORE SPECIFYING OR ORDERING THE PYRAMID PRODUCT.

NOTE:

The nature of coloured stainless steel is that the colour and/or tone may vary in different lighting conditions, between batches of stainless steel and production runs. It is often necessary to agree control samples prior to manufacture.

On larger orders it is advisable to agree control samples to define an agreeable colour range prior to the placing of an order. Unless control samples are agreed Rimex is not responsible for differences in tone and appearance of the ColourTex® product.

Due to the nature of the manufacturing process all ColourTex® products will be supplied with holes approximately 5mm (0.197'') in diameter that run down the length of one side of each sheet every 1,000mm (39.3'').

Standard manufacturing parameters are stated throughout this product catalogue. Please enquire for non-standard requirements as these may be possible.

The pattern definition can fall outside normal definition and registration requirements for gauges thicker than 1.5mm (0.060''). Pattern definition will change with thicker gauges and can differ to samples. Pattern definition can also vary with different batch materials and with separate orders.

• 1. Sample Statement: Samples supplied by Rimex are for promotional purposes only and are not to be used as control materials for goods supplied. If control samples are required for a specific order Rimex needs to be notified in advance.



• 2. Product Images Statement: Product images are not to scale. They are scaled to give the best visual representation of the product.



• 3. Promotional Advice and Materials Statement: All data, images, drawings, descriptions and other information furnished by Rimex including verbal information, in or on its website, catalogues, brochures, CD's, pamphlets, price lists, documents or any other promotional media are intended to be as accurate as possible but are given for general information only and are not binding on Rimex in respect of a particular order. All information, unless stated otherwise, is subject to reasonable variations. Rimex does not accept responsibility for errors or information which is found to be misleading. Before using products supplied or manufactured by Rimex, the customer should satisfy itself of their suitability for any required purpose.



• 4. Protective Tape Statement: Unless ordered to the contrary all material is coated with standard commercial protective tape. No warranty is provided by Rimex as to the suitability of coating used. A copy of appropriate data sheets are available upon request. If a warranty is required the customer should deal direct with a protective tape supplier and notify Rimex of the coating to be used. The use of nonstandard protective tape might be an additional cost to previously quoted prices. Protective tape should be removed as soon as practical and should not be exposed to direct sunlight and temperatures that might cause delamination of adhesive on the coating. The customer is always advised to seek information from the coating manufacturer. Rimex cannot provide information or warranties in respect of protective tapes.

Stainless steel is highly recyclable and typically contains 70% of recycled material. This percentage is increasing. Source: International Stainless Steel Forum.

Back to top